Basics of a Continuous Caster Rotary Union
For cooling water to pass through the caster rolls, a rotary union is required to allow the cooling water to enter and exit the rolls that support the strand of steel as it is solidifying.
Read moreFluid Handling
Kadant Johnson Rotary Joint Alignment – Better Alignment for Longer Service Life
The best possible service life for rotary joints will be achieved if attention is paid to alignment and misalignment is minimized.
Read moreWritten by Ken Lahrke on June 06, 2017.
Drying Performance Evaluation Identifies Critical Issues to Achieve Project ROI
A U.S. linerboard producer was considering upgrading the forming section on its paper machine.
Read moreWritten by John Peter on May 23, 2017.
Meet Team Kadant – Erich Bernhardt, Sales/Application Engineer
Erich Bernhardt, sales/application engineer, has worked at Kadant Johnson since 2007.
Read moreWritten by Kandi Hagenbuch on April 27, 2017.
Carbon Guides vs. Rolling Element Bearings
There are many factors when deciding whether to pick a rolling element bearing or a carbon guide supported rotary joint.
Read moreWritten by Matt Mitchell on April 11, 2017.
Why is it important to use OEM genuine parts?
Operational efficiency and safety are compromised when process machinery equipment is not properly maintained with OEM genuine repair parts.
Read moreWritten by Danielle Rohrer on June 20, 2017.
Meet Team Kadant – Jan Walter, Sales Development Manager
Jan Walter, sales development manager, has worked at Kadant Johnson since 2011.
Read moreWritten by Kandi Hagenbuch on May 25, 2017.
Dryer Camera Brings Condensate Behavior to Light
People may be surprised to learn that when a pressurized roll is rotating, you can see what is going on inside the roll.
Read moreWritten by Matt Beach on May 09, 2017.
How to Overcome the Challenges of Vacuum Systems When Using a Conventional Pressure-Powered Pump
Pressure-powered pumps have shown their worth on draining condensate from systems where centrifugal pumps have experienced reliability issues due to cavitation.
Read moreWritten by Erich Bernhardt on April 25, 2017.
Meet Team Kadant – Matt Beach, Director of Research & Product Development
Matt Beach, director of research and product development, has worked at Kadant Johnson since 2000.
Read moreWritten by Kandi Hagenbuch on March 30, 2017.
